Gigabyte G3 2500E SSD 2TB M2 PCle 3.0×4 2400/2000

Description

Gigabyte G3 2500E SSD 2TB M2 PCle 3.0×4 2400/2000 MB/s MTBF 1.5m hr Limited 5 years or 480TBW

Specification

Interface
PCIe 3.0×4, NVMe1.3 interface

Form Factor
M.2 2280

Total Capacity
2000GB

External DDR Cache
N/A

Sequential Read speed
Up to 2400 MB/s

Sequential Write speed
Up to 2000 MB/s

Dimension
22 x 2.3 x 80 mm

Mean time between failure (MTBF)
1.5 million hours

Max. Operating Power
Read: 2300mW
Write: 2250mW

Power Consumption (Idle, PS3)
30mW

Power Consumption(PS4, L1.2)
5mW

Temperature (Operating)
0°C to 70°C

Temperature (Storage)
-40°C to 85°C

Warranty
1. Limited 5 years or 480TBW.
2. Limited warranty based on 5 years or 480TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)

Note
• Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
• Performance may vary based on SSD’s firmware version and system hardware configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
• Speeds based on internal testing. Actual performance may vary.
• 1GB = 1 billion bytes. Actual useable capacity may vary.