GIGABYTE Gen4 4000E SSD 500GB<\/p>\n
Specification<\/p>\n
Interface PCI Express 4.0×4, NVMe 1.4
\nForm Factor M.2 2280
\nTotal Capacity 500GB
\nExternal DDR Cache N\/A
\nSequential Read speed Up to 3600 MB\/s
\nSequential Write speed Up to 3000 MB\/s
\nDimension 22 x 2.3 x 80 mm
\nMean time between failure (MTBF) 1.5M hours
\nMax. Operating Power Read: 4300mW Write:4400mW
\nPower Consumption (Idle, PS3) 40mW
\nPower Consumption(PS4, L1.2) 5mW
\nTemperature (Operating) 0\u00b0C to 70\u00b0C
\nTemperature (Storage) -40\u00b0C to 85\u00b0C<\/p>\n
Warranty
\n1. Limited 3 years or 300TBW.
\n2. Limited warranty based on 3 years or 300TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
\n*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
\n3. When the usage of an NVME SSD as indicated by the “”Percentage Used”” (SMART ID: 05) in SMART page of “”GIGABYTE SSD toolbox”” reaches 100 means out of warranty. (A new unused product will show the number of 0)
\nNote
\n\u2022 Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
\n\u2022 Performance may vary based on SSD’s firmware version and system hardware configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
\n\u2022 Speeds based on internal testing. Actual performance may vary.
\n\u2022 1GB = 1 billion bytes. Actual useable capacity may vary.<\/p>\n","protected":false},"excerpt":{"rendered":"